Connect with us

Energy & Critical Metals

Where there’s smoke, there’s fire: Charger confirms lithium at three Bynoe prospects

Special Report: Charger Metals says drilling at its Bynoe project in the NT has confirmed lithium and tantalum mineralisation at … Read More
The post…

Share this article:

Published

on

This article was originally published by Stockhead
  • Lithium mineralisation flagged at three prospects at Bynoe, next door to 30.6Mt Finniss lithium mine
  • There are more than 20 prospect areas to test at the Bynoe project
  • Field programs are now planned at Charger’s Lake Johnston project

 

Charger Metals says drilling at its Bynoe project in the NT has confirmed lithium and tantalum mineralisation at three prospects.

The Bynoe project is right next door to Core Lithium’s (ASX:CXO) 30.6Mt at 1.31% Li2O Finniss lithium mine, which shipped its first 10,000t cargo of spodumene concentrate under long-term offtake agreements earlier this month.

Geochemistry, aeromagnetic programs and open file research completed by Charger Metals (ASX:CHR) indicates that multiple swarms of lithium-caesium-tantalum pegmatites extend from Finniss into Bynoe.

New assay results from 3 diamond drill holes and 60 reverse circulation (RC) drill-holes across 7 prospective target areas have confirmed lithium and tantalum mineralisation at three of the prospects: Enterprise, Utopia and 7Up.

Highlight intersections to-date include:

  • 7m at 0.96% Li2O from 107m, including 5m at 1.13% Li2O from 108m (CBYRC023);
  • 16m at 0.65% Li2O from 185m, including 1m at 1.91% Li2O from 198m (CBYRC024);
  • 12m at 0.49% Li2O from 267m, including 4m at 0.84% Li2O from 275m (CBYD003);
  • 5m at 0.73% Li2O from 104m, including 1m at 1.05% Li2O from 108m (CBYRC042); and
  • 6m at 0.50% Li2O from 53m (CBYRC051). 

 

Where there’s smoke, there’s fire

“We are encouraged by the recent assay results, which confirm our observations of spodumene within pegmatites at three of the seven prospects we have drilled to-date at Bynoe,” Charger’s MD Aidan Platel said.

“Whilst the lithium results have been low-grade, where there is smoke there is fire, and we remain confident of intersecting economic lithium mineralisation given the numerous (>20) prospect areas identified within the large tenement area.”

Assay results for a further 6 holes remain outstanding and are expected over the next four weeks.

 

Charger Metals
Prospect location map of the Bynoe lithium project showing the prospects that have been drill-tested to-date (in red). Core Lithium’s nearby deposits and key prospects are shown for reference. Source: Supplied (CHR).

 

ANT and gravity survey data pending

Ambient Noise Tomography (ANT) and ground gravity surveys have been completed over a large area in the northeast of the project.

The data from the geophysical surveys are being processed and modelled with the aim of detecting any potentially large “blind” pegmatite systems that do not outcrop.

Charger says ground gravity has the potential to detect significant pegmatite systems at Bynoe, particularly when modelled in conjunction with the ANT survey results.

“Given the “masking” effect at surface from the seasonally wet conditions which leach the lithium from the significant weathering profile, lithium exploration at Bynoe is difficult using the more traditional exploration methods (e.g.: rock chip sampling),” Platel said.

“As such, we have completed concurrent ANT and gravity surveys which have the ability to delineate new high priority drill targets that are not apparent at surface, across prospective yet underexplored areas of the Bynoe Project.

“We look forward to seeing the modelled results of these surveys in October.”

Additional infill surface geochemical sampling and mapping programs have also been completed in the northeast.

 

Upcoming drilling at Medcalf

Charger is also preparing for field programs at its Lake Johnston Project in WA, which will include diamond and RC drill programmes at the Medcalf spodumene prospect, Platel said.

Previous drilling at the Medcalf prospect delineated a swam of stacked spodumene-bearing pegmatites up to 13m thick within a 100m wide, 700m long corridor.

High-grade lithium results included 4m at 1.21% Li2O from 208, 3m at 1.33% Li2O from 110m, and 3m at 1.35% Li2O from 136m.

 


 

This article was developed in collaboration with Charger Metals, a Stockhead advertiser at the time of publishing.

 

This article does not constitute financial product advice. You should consider obtaining independent advice before making any financial decisions.

The post Where there’s smoke, there’s fire: Charger confirms lithium at three Bynoe prospects appeared first on Stockhead.

aim


tantalum

Share this article:

Uranium Exploration Company Announces Additional Staking in the Athabasca Basin

Source: Streetwise Reports 12/22/2023

Skyharbour Resources Ltd. announced an update from its Canada-based Falcon Project along with additional…

Share this article:

Published

on

By

Continue Reading
Energy & Critical Metals

Tesla Launches New Mega Factory Project In Shanghai, Designed To Manufacture 10,000 Megapacks Per Year

Tesla Launches New Mega Factory Project In Shanghai, Designed To Manufacture 10,000 Megapacks Per Year

Tesla has launched a new mega factory…

Share this article:

Published

on

Continue Reading
Energy & Critical Metals

Giving thanks and taking stock after “a remarkable year”

An end-of-year thank you to our readers, industry colleagues and advertisers before Electric Autonomy breaks from publishing until Jan. 2
The post Giving…

Share this article:

Published

on

Continue Reading

Trending